View The Vpn Firewall Ipsec Vpn Logs - NETGEAR SRX5308 Reference Manual

Figure 102.
The Active IPSec SAs table lists each active connection with the information that is described
in the following table. The default poll interval is 5 seconds. To change the poll interval period,
enter a new value in the Poll Interval field, and then click Set Interval. To stop polling, click
Stop.
Table 36. IPSec VPN Connection Status screen information
Item
Policy Name
Endpoint
Tx (KB)
Tx (Packets)
State
Action

View the VPN Firewall IPSec VPN Logs


To view the IPSec VPN logs:
Select Monitoring > VPN Logs. The VPN Logs submenu tabs display, with the IPSec VPN
Logs screen in view:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The name of the VPN policy that is associated with this SA.
The IP address on the remote VPN endpoint.
The amount of data that is transmitted over this SA.
The number of IP packets that are transmitted over this SA.
The current status of the SA. Phase 1 is the authentication phase, and Phase 2 is key
exchange phase. If there is no connection, the status is IPSec SA Not Established.
Click the Connect table button to build the connection, or click the Disconnect table
button to terminate the connection.
Virtual Private Networking Using IPSec Connections
159