Using The Command Line Interface - NETGEAR ProSafe FVS336G Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
The VPN firewall's remote login URL is https://<IP_address> or
https://<FullyQualifiedDomainName>..
Note: To maintain security, the FVS336G will reject a login that uses http://address
rather than the SSL https://address.
Note: The first time you remotely connect to the FVS336G with a browser via SSL, you
may get a warning message regarding the SSL certificate. If you are using a
Windows computer with Internet Explorer 5.5 or higher, simply click Yes to accept
the certificate.
Note: If you are unable to remotely connect to the FVS336G after enabling HTTPS
remote management, check whether other user policies, such as the default user
policy, are preventing access.
Note: If you disable HTTPS remote management, all SSL VPN user connections will
also be disabled.
Tip: If you are using a dynamic DNS service such as TZO, you can identify the WAN IP
address of your FVS336G by running tracert from the Windows Run menu
option. Trace the route to your registered FQDN. For example, enter tracert
FVS336G.mynetgear.net, and the WAN IP address that your ISP assigned to
the FVS336G is displayed.

Using the Command Line Interface

Note: The command line interface is not supported at this time. Check the NETGEAR
Web site for the latest status.
You can access the command line interface (CLI) using Telnet from the LAN or, if enabled in the
Remote Management menu, from the WAN.
8-12
v1.2, June 2008
Router and Network Management