Testing The Connection; Creating A Vpn Client Connection: Vpn Client To Fvs338 - NETGEAR ProSafe FVS338 Reference Manual

FVS338 ProSafe VPN Firewall 50 Reference Manual
6. Enter the remote LAN IP address and subnet mask.
7. Click Apply to create the "to_fvs" IKE and VPN policies.
Figure 5-6

Testing the Connection

1. From a PC on either firewall's LAN, try to ping a PC on the other firewall's LAN. Establishing
the VPN connection may take several seconds.
2. For additional status and troubleshooting information, view the VPN log and status menu in
the FVX538 or FVS338.

Creating a VPN Client Connection: VPN Client to FVS338

This section describes how to configure a VPN connection between a Windows PC (the client)
installed with the NETGEAR ProSafe VPN Client and the VPN firewall.
5-12
v1.0, September 2006
Virtual Private Networking