Adding A New Host Name; Configuring The Ssl Vpn Client - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Adding a New Host Name
After you have configured port forwarding by defining the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users, you then can also specify
host-name-to-IP-address resolution for the network servers as a convenience for users. Host name
resolution allows users to access TCP applications at familiar addresses such as mail.example.com
or ftp.customer.com rather than by IP addresses.
To add servers and host names for client name resolution:
1. Select VPN > SSL VPN from the menu. The SSL VPN submenu tabs display, with the
Policies screen in view.
2. Click the Port Forwarding submenu tab. The Port Forwarding screen displays (see
Figure 6-3 on page
3. In the Add New Host Name for Port Forwarding section of the screen, specify information in
the following fields:
•
Local Server IP Address. The IP address of an internal server or host computer that you
want to name.
•
Fully Qualified Domain Name. The full server name.
Note: If the server or host computer that you want to name does not appear in the
List of Configured Applications for Port Forwarding table, you must add it
before you can rename it.
4. Click the Add table button. The new application entry is added to the List of Configured Host
Names for Port Forwarding table.
To delete a name from the List of Configured Host Names for Port Forwarding table, select the
check box to the left of the name that you want to delete, and then click the Delete table button in
the Action column.
Configuring the SSL VPN Client
The SSL VPN client on the VPN firewall assigns IP addresses to remote VPN tunnel clients.
Because the VPN tunnel connection is a point-to-point connection, you can assign IP addresses
from the local subnet to the remote VPN tunnel clients.
6-10
6-8).
v1.0, April 2010
Virtual Private Networking Using SSL Connections
Advertisement
Table of Contents
Troubleshooting
