System Setup - Xerox DocuColor 4 Administrator's Manual

2.3 Setting up the printer/copier
2
2.3.3

System Setup

This section describes first-time setup if no password has been set.
SYSTEM SETUP
To advance to the PRINTER NAME screen, press Item/Enter.
PRINTER NAME
[DEFAULT PRINTER NAME]
Use this option to give the printer/copier a name. The printer/copier name
can be up to 16 characters.
PRINT START PAGE
YES/NO [NO]
Use this option to specify whether the printer/copier should print a start page
when it restarts to verify that it is working properly. The Start page contains
such information as: printer name, enabled network protocols, amount of
memory installed, and options installed on the printer/copier.
PUBLISH PRINTD Q
YES/NO [YES]
Use this option to enable recently printed jobs to be stored on the printer.
The Printed queue makes it convenient to reprint those jobs.
24
Choose:
PRINTER SETUP
PS SETUP
PCL SETUP
I/O PORT SETUP
NETWORK PROTOCOL SETUP
NETWORK SERVICES SETUP
To specify:
Printer settings
PostScript settings for the printer/
copier.
PCL settings for the printer/copier
Settings for the network and/or par-
allel connections to the printer/
copier
Settings for the network protocols
Settings for the printing services
See:
page 26
page 27
page 28
page 30
page 32
page 35