Failed Login Screen; Figure 90 Event > Device Login > Failed Login - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Vantage Report User's Guide
Table 84 Event > Device Login > Successful Login
LABEL
Settings
Time
Login User
Login Type
Total Count
Total Page
First .. Last
Go

8.2 Failed Login Screen

Use this screen to look at who tried to log in into the ZyXEL device (for management or
monitoring purposes) but failed. See
source data used by the report.
Note: To use the authentication screens, each ZyXEL device must record
authentication successes and failures in its log. See the User's Guide for each
ZyXEL device for more information. In most devices, go to Logs > Log
Settings, and make sure System Maintenance is enabled.
Click Event > Device Login > Failed Login to open the Failed Login screen.
Figure 90 Event > Device Login > Failed Login
185
DESCRIPTION
Click this if you want to specify the select any Start Date and End Date. The
Report Display Settings screen appears.
This field displays the time the Vantage Report server received the log entry
from the ZyXEL device, not the time the user logged into the device.
This field displays who logged into the selected device.
This field displays what type of connection the user used to log into the device.
This field displays how many records there are for the specified search criteria.
This field displays how many screens it takes to display all the records.
Click First, Last, or a specific page number to look at the records on that page.
Some choices are not available, depending on the number of pages.s
Enter the page number you want to see, and click Go.
section 2.4 on page 28 for more information about the
Chapter 8 Authentication