Testing The Connection; Managing Vpn Tunnel Policies - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

7. In the left frame, expand Key Exchange (Phase 2) and choose Proposal 1. The fields in this
proposal should also mirror those in the following figure. No changes should be necessary.
Figure 6-9
8. In the upper left of the window, click the disk icon to save the policy.

Testing the Connection

1. From your PC, right-click on the VPN client icon in your Windows toolbar and choose
Connect..., then My Connections\SRXN.
Within 30 seconds you should receive the message "Successfully connected to My
Connections\SRXN" and the VPN client icon in the toolbar should say On:
2. For additional status and troubleshooting information, right-click on the VPN client icon Logs
and Connection Status screens in the SRXN3205.

Managing VPN Tunnel Policies

After you use the VPN Wizard to set up a VPN tunnel, a VPN policy and an IKE policy are stored
in separate policy tables. The name you selected as the VPN tunnel connection name during
Virtual Private Networking Using IPsec
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
v1.0, October 2008
6-11