Changing System Information - 3Com WX4400 Reference Manual

182 C 6: C
HAPTER ONFIGURING
Changing System
Information
WX S P
YSTEM ARAMETERS
15 In the End Day list, select the day of the week when the time change
ends.
16 In the End Hour box, specify the hour (between 0 and 23) when the time
change ends.
17 In the End Minute box, specify the minute (between 0 and 59) when the
time change ends.
18 Click OK.
To change system information:
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select System Information.
The System Information wizard appears.
4 In the Contact box, type the contact name for the WX.
5 In the Location box, type the location of the WX.
6 In the Prompt box, type the CLI prompt for the WX.
If you do not specify a prompt, the CLI uses the following default prompts:
WX1200> for restricted access
WX1200# for enabled access
The mm portion of the prompt shows the model number for the WX
switch. The nnnnnn portion of the prompt shows the last six digits of
the MAC address for the WX switch.
7 In the Message of the Day box, type the message that appears before the
beginning of each login prompt of each CLI session. Do not use the
number sign (#), single quotation mark ('), double quotation marks (" "),
or ampersand (&).
8 Click OK.