Setting A Range Of Dscp Values To A Single Cos Value; Resetting Cos Mapping To Their Default Values - 3Com WX4400 Reference Manual

Setting a Range of
DSCP Values to a
Single CoS Value
Resetting CoS
Mapping to their
Default Values
To set a range of DSCP values to a single CoS value:
1 Access the QoS tables:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select QoS.
2 In the Task List panel, select DSCP to CoS Range.
3 In the First DSCP list, select the lower DSCP value in the range.
4 In the Last DSCP list, select the upper DSCP value in the range.
5 In the CoS value list, select the internal CoS value to which you want MSS
to map all DSCP values within the selected range.
6 Click Finish.
To reset CoS mapping to their default values:
1 Access the QoS tables:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select QoS.
2 In the Task List panel, select Reset to defaults.
3 Click Save.
Viewing and Changing CoS Mappings 243