3Com WX4400 Reference Manual page 192

192 C 6: C
HAPTER ONFIGURING
WX S P
YSTEM ARAMETERS
To use an existing rule, leave the rule in the list.
c Click Next.
d Select the authentication and accounting method (RADIUS server
group or local database).
(For information, see "AAA Methods (RADIUS Server Groups and the
Local User Database)" on page 250.)
e Click Next.
f To configure accounting, select Enabled, select the record type
(Start-Stop or Stop-Only), then select LOCAL or a RADIUS server group
for the accounting and click Add.
g Click Finish.
If you selected Local as an authentication method, the users in the
local database are listed. Go to step 12.
If you did not select LOCAL, click Finish to close the wizard and
save the changes. You are finished with this procedure.
11 If you selected Open Access in step 2, select the VLAN to which you want
the switch to assign users. Otherwise, go to step 12.
Click Finish to close the wizard and save the changes. You are finished
with this procedure.
12 Click Next.
If you selected LOCAL as an authentication method, 3WXM lists the users
in the local database for the switch. For convenience, you can add,
modify, or delete users on this page. To add a user, click Create and see
"Creating a Named User" on page 301. To modify a user, select the user
and click Properties. To delete a user, select the user and click Delete.
If you select Web Portal in step 2, 3WXM automatically creates a user
named web-portal-wired. Similarly, if you select Open Access, 3WXM
creates a user called last-resort-wired. Do not delete or modify these
users.
(You can add, modify, or delete users at any time, even after this wizard
is closed. See "Creating and Managing Users in the Local User Database"
on page 299.)
13 Click Finish.