3Com WX4400 Reference Manual page 285

You cannot configure any gigabit Ethernet port, or port 7 or 8 on a WX1200
switch, or port 1 on a WXR100 switch, as a MAP port. To manage a MAP on
a WX4400 switch, configure a Distributed MAP connection on the switch.
(See "Creating a Distributed MAP" on page 282.)
To configure a directly connected MAP
1 Access the Create Direct-Connect AP wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to Wireless.
d Select Access Points.
2 In the Task List panel, select Directly Connect AP.
3 Select the WX port the MAP will be connected to from the Available Ports
drop-down list.
Configuring a directly connected MAP in a port converts the port to a
MAP access port. If the port is a statically configured member of a VLAN,
the port is removed from the VLAN.
4 Click Next.
5 Select the MAP model from the MAP Model list.
6 To select the radio type for a single-radio model, click the MAP Radio
Type box and select the radio type from the list:
11a—802.11a
11b—802.11b only
11g—802.11b/g
7 Click Next.
The non-editable number (1 or 2) indicates the radio number on the MAP.
8 To select the radio type for a single-radio model, click the MAP Radio
Type box and select the radio type from the list:
11a—802.11a
11b—802.11b only
11g—802.11b/g
9 Click Next.
Viewing and Configuring MAPs 285