Importing A Network Plan - 3Com WX4400 Reference Manual

Importing a Network
Plan
4 Click Switch Plan in the left column to display a list of available network
plans.
5 Select the network plan you want to open and click Switch.
If any changes were made to the currently loaded network plan, you are
prompted to save them and close the file. The Switch Network Plan
dialog box appears.
3WXM establishes a new connection to the host running 3WXM Services
and loads the specified network plan.
You can import objects from another network plan into the currently
open plan. When you import objects from another plan, objects are
added to the currently open plan as follows:
If an object (object name) exists in the plan you are importing but not
in the open plan, the object is added to the open plan.
If an object (object name) exists in both plans, the copy of the object
in the imported plan replaces the object in the open plan.
If both plans have the same floor name, the floor in the plan you are
importing completely replaces the floor of the same name in the other
plan.
3Com recommends that you save a backup copy of the plan before
importing objects from another plan. To save a backup copy, you can use
the Save As page.
To import a plan:
1 Select Services > Plan Management to access the 3WXM Plan
Management page.
2 Click Import Plan in the left column to display the Import Plan page.
3 Select the network plan you want to import, from the Plan drop-down
list.
4 3WXM compares the object names in the plan to be imported with the
object names in the open plan. If both plans have objects of the same
name and type, the objects are listed and Conflict appears in the Status
column.
5 Do one of the following, depending on whether you want to import all
objects from the plan:
Managing Network Plans 61