3Com WX4400 Reference Manual page 261

11 Select the encryption algorithms to use:
AES (CCMP)—Usually used with RSN (WPA2)
TKIP—Usually used with WPA
WEP-104—Used with dynamic WEP
WEP-40—Used with dynamic WEP
12 Click Next.
13 If you selected Static WEP in step 7, specify WEP keys. Otherwise, go to
step 14.
For each key (up to four), type the key value in the corresponding key box.
By default, data in unicast and multicast packets are encrypted using
WEP key 1. To use another key for either type of packet, select the key
number in the WEP Unicast Key Index or WEP Multicast Key Index box.
14 Click Next.
15 Select the VLAN into which you want the switch to place users of the SSID.
If you want to specify the VLAN later when configuring the access rules,
you can leave the VLAN Name box blank.
16 Select or create the radio profile to map to this service profile.
By default, the default radio profile is selected.
To map the service profile to the default radio profile, leave default
selected and go to step 17.
To map the service profile to a different radio profile, select the radio
profile and go to step 17.
To create a new radio profile:
a Select Create new Radio Profile and click Next.
b Type the radio profile name in the Name box and click Next.
c Select the radios you want to manage with the radio profile and click
Move to move them to the Current Members list.
If you have not planned RF coverage or configured any MAPs in the
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click Properties, then select Radio Selection. See
"Configuring Advanced Radio Profile Settings" on page 274.)
d Go to step 17.
17 Click Finish.
Viewing and Configuring Wireless Services 261