3Com WX4400 Reference Manual page 370

370 C 10: M
HAPTER ANAGING
WX S I
YSTEM MAGES AND
Before you can distribute an image, you must add it to the image
repository. (See "Using the Image Repository" on page 369.)
To immediately install an image on WX switches
1 Select the Devices tool bar option.
2 At the bottom of the Task List panel, select Device Operations.
3 In the Managed Devices list, select the WX switches onto which you want
to install the image.
To select more than one WX, click Shift while clicking to select
contiguous items, or click Ctrl while clicking to select noncontiguous
items.
4 In the Task List panel, select Image Install.
5 Click on Select an Image to display the list of images in the repository.
6 Select the image and click Install.
To schedule installation of an image on WX switches
1 Select the Devices tool bar option.
2 At the bottom of the Task List panel, select Device Operations.
3 In the Managed Devices list, select the WX switches onto which you want
to install the image.
To select more than one WX, click Shift while clicking to select
contiguous items, or click Ctrl while clicking to select noncontiguous
items.
4 In the Task List panel, select Schedule Install.
5 Click on Select an Image to display the list of images in the repository.
6 Click Next.
7 Edit the start date and time.
(The date and time are based on the date and time on the machine
where 3WXM Services is installed.)
8 Click Finish.
C
ONFIGURATIONS