Modifying Configuration Change Polling Options - 3Com WX4400 Reference Manual

Wireless lan mobility system wireless switch manager
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

376
C
10: M
HAPTER
Modifying
Configuration
Change Polling
Options
WX S
I
ANAGING
YSTEM
MAGES AND
By default, 3WXM Client polls WX switches in the network every 15
minutes for network changes, and displays a popup message if changes
are detected. The popup message is in addition to notification in the
Alerts panel.
To modify configuration polling options
1 Select the Devices tool bar option.
2 Click Edit managed devices options on the toolbar of the Device tab.
The Managed Device Options dialog box appears.
3 To enable the detection of configuration changes in the network, make
sure Enabled is selected next to Poll for configuration changes.
4 To specify how often network checks occur, specify the interval between
checks, from 1 to 1440 minutes (24 hours), in the Interval box. The
default is 15 minutes.
5 To be notified of network changes by a popup message, select Prompt
when network changes are detected.
To disable the popup message, deselect the option.
Disabling the popup message does not affect the Network Changes
information in the Alerts panel. The Alerts panel still notifies you of
network changes.
6 To instruct WX switches to save deployed configuration changes in their
configuration files, select Save WX Configuration on Deploy.
7 Click Close.
C
ONFIGURATIONS

Advertisement

Table of Contents
loading

Table of Contents