Verifying Configuration Changes; Verification Tabs - 3Com WX4400 Reference Manual

11

Verification Tabs

V
ERIFYING
C
HANGES
3WXM uses a set of rules to verify WX switch configurations. Changes to
a switch's configuration in 3WXM or in the live network are automatically
evaluated by comparing the changes to the rules. If the evaluation
detects any error or warning conditions, the information in the Alerts
panel is updated:
Errors or warnings in a switch's configuration in 3WXM affect the
Configuration counts.
Errors or warnings in the network affect the Network counts.
Click on Configuration or Network in the Alerts panel to display the
Verification tabs in the Content panel.
The upper section of the panel lists error descriptions in red and lists
warning descriptions in orange:
Errors are serious problems that must be addressed before
deployment. By default, you cannot deploy a network plan with errors
in it. After fixing errors, verify the network plan again to ensure that
the errors have been resolved.
Warnings are noncritical issues that do not stop deployment. Review
any warnings and consider resolving the issues before deployment.
Details about the selected error or warning appear in the lower left
section of the tab.
The Resolution section lists options for resolving the warning or error.
C
ONFIGURATION