3Com WX4400 Reference Manual page 51

Switch to an existing network plan. Open one of the sample plans
included with 3WXM or a plan that you or another 3WXM user has
saved on the 3WXM Services host.
To open an existing network plan, use the Switch Plan page under
Services > Plan Management and select the network plan from
the list of available network plans. 3WXM connects to the 3WXM
Services host and opens the specified network plan on the server.
See "Managing Network Plans" on page 59 for more information.
3WXM has two sample plans:
QuickStart—Contains a two-floor building with two WX switches
and two MAP access points on each switch. Each switch and its
MAPs provide coverage for a floor. The equipment is configured to
provide both clear (unencrypted) and secure (802.1X) wireless
access. (For more information, see the
Controller Quick Start
StarterKit—Contains a simple rectangle as a floor plan, but with
one WX switch and four MAP access points.
3WXM saves the Default plan even if you switch network plans or close
it.
(For more information, see "Working with Network Plans" on page 57.)
If a Certificate Check dialog appears, click Accept.
If this is the first time you are starting 3WXM, or you have not yet
activated your license, the client will not establish a connection to the
server when you click Next. Instead, the client will briefly contact the
server, then display the following message: Missing license.
If you need to install license information, click Cancel to close the
dialog and go to step 5.
If you have already installed license information, go to step 17.
5 Select Help > Licensing from the tool bar. The License Wizard is
displayed.
Wireless LAN Switch and
Guide.)
Starting 3WXM 51