Launching A Telnet Management Session With The Switch; Launching A Web Management Session With The Switch - 3Com WX4400 Reference Manual

184 C 6: C
HAPTER ONFIGURING
Launching a Telnet
Management Session
with the Switch
Launching a Web
Management Session
with the Switch
WX S P
YSTEM ARAMETERS
To remove an Auto DAP
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select Remove Auto DAPs.
The Remove Auto DAP wizard appears. The MAPs that were configured
using a Distributed MAP template are listed.
4 Select the Auto DAP that is no longer on the network.
5 Click Next.
6 Click Finish.
This option is available only if the switch is running and can be reached
through the network by 3WXM Services. This option also requires the
Managed option for the switch to be enabled. (See step 6 in "Modifying
Basic Switch Parameters" on page 179.)
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select Launch Telnet.
This option is available only if the switch is running and can be reached
through the network by 3WXM Services. This option also requires the
Managed option for the switch to be enabled. (See step 6 in "Modifying
Basic Switch Parameters" on page 179.)
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select Launch Browser.