3Com WX4400 Reference Manual page 37

When you click a link to open a configuration wizard, if there are unsaved
changes, 3WXM prompts you to apply or cancel the changes. Click
Apply to save the buffered changes and open the wizard.
The Save, Apply, Finish, and OK buttons do not send configuration
changes to the WX switches in the network. To send changes made in
the network plan to switches in the network, deploy the changes. (See
"Reviewing and Deploying Switch Configuration Changes".)
Reviewing and Deploying Switch Configuration Changes
3WXM does not automatically deploy switch configuration changes from
the network plan to the actual switches in the network. The following
options in the Task List panel allow you to review and deploy changes:
Review—Displays a categorized list of the undeployed changes.
Deploy—Sends the changes to the network.
When you click Deploy, 3WXM verifies the configuration changes and
displays warnings or errors if applicable. If any errors are listed, 3WXM
does not deploy the changes.
To resolve errors and deploy the changes, use the Verification option. The
Verification option provides detailed information for errors and warnings
and enables you to resolve them. Generally, you can resolve an error or
warning by ignoring it or by clicking a link to open a configuration
wizard. (For more information, see Chapter 11.)
Display Panels 37