3Com WX4400 Reference Manual page 50

50 C 3: G
HAPTER ETTING
S
TARTED
2 In the 3WXM Services Connection dialog box, enter the IP address of the
machine on which 3WXM Services is installed.
3 If you or the 3WXM administrator configured 3WXM access control,
enter your username and password.
4 Click Next.
If the 3WXM Service is installed on the same machine as the one you are
using to run 3WXM, use 127.0.0.1 as the IP address. This is a standard IP
loopback address.
If you are starting 3WXM for the first time, or you have not previously
activated your licences, a license message appears.
If you have already activated the license(s), you can do one of the
following:
Edit the currently loaded network plan.
If this is a new installation of 3WXM, a network plan called Default
is opened. You can edit this plan, use the Save As page under
Services > Plan Management to save it under a new name, or
close it and start a new plan by using the New Plan page under
Services > Plan Management.
If you are upgrading from an earlier version of 3WXM, the plan
that was last opened using the previous version is opened again.
Create a new network plan. (Use the New Plan page under
Services > Plan Management.)