Configuring A Voice Over Wireless Service - 3Com WX4400 Reference Manual

Configuring a Voice
over Wireless Service
The VLAN and other authorization attributes can be assigned to users in
the local database, on remote servers, or in the service profile of the SSID
the user logs into. The VLAN you select here is used only if a VLAN
attribute is not configured for the user on the RADIUS server or in the
local database of a switch.
14 Select or create the radio profile to map to this service profile.
By default, the default radio profile is selected.
To map the service profile to the default radio profile, leave default
selected and go to step 15.
To map the service profile to a different radio profile, select the
radio profile and go to step 15.
To create a new radio profile:
a Select Create new Radio Profile and click Next.
b Type the radio profile name in the Name box and click Next.
c Select the radios you want to manage with the radio profile and click
Move to move them to the Current Members list.
If you have not planned RF coverage or configured any MAPs in the
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click Properties, then select Radio Selection. See
"Configuring Advanced Radio Profile Settings" on page 274.)
d Go to step 15.
15 Click Finish.
The service profile appears in the service profile table.
If the VoIP devices use Wi-Fi Multimedia, you do not need to configure a
service profile. WMM is supported automatically. A voice service profile is
required only for non-WMM devices.
1 Access the Voice Service Profile wizard:
a In the Organizer panel, click on the plus sign next to the WX switch on
which you want to configure the service profile.
b Click on the plus sign next to Wireless.
c Select Wireless Services.
d In the Task List panel, select Voice Service Profile.
2 Read the description of the wizard on the first page, then click Next.
Viewing and Configuring Wireless Services 253