3Com WX4400 Reference Manual page 307

Creating and Managing Users in the Local User Database
Table 22 Authentication Attributes for Local Users (continued)
Attribute
mobility-profile
(network access mode
only)
service-type
Description Valid Value(s)
Mobility Profile Name of an existing Mobility Profile,
attribute for the which can be up to 32 alphanumeric
user. (For more characters, with no tabs or spaces.
information, see
If the Mobility Profile feature is
"Viewing and
enabled, and a user is assigned the
Changing Mobility
name of a Mobility Profile that does
Profiles" on
not exist on the WX switch, the user is
page 342.)
denied access.
Mobility-Profile is a
3Com
vendor-specific
attribute (VSA). The
vendor ID is 43,
and the vendor
type is 2.
Type of access the Access type, which can be one of the
user is requesting. following:
For administrative sessions, the WX
switch always sends 6 (Administrative).
The RADIUS server can reply with one
of the values listed above.
If the service-type is not set on the
RADIUS server, administrative users
receive NAS-Prompt access, and
network users receive Framed access.
Note: MSS will quietly accept
Callback Framed, but you cannot
select this access type in MSS.
2—Framed; for network user access
6—Administrative; for administrative
access, with authorization to access
the enabled (configuration) mode.
The user must enter the enable
command and the correct enable
password to access the enabled
mode.
7—NAS-Prompt; for administrative
access to the nonenabled mode
only. In this mode, the user can still
enter the enable command and
the correct enable password to
access the enabled mode.
307