3Com WX4400 Reference Manual page 257

c Select Wireless Services.
d In the Task List panel, select Web-Portal Service Profile.
2 Read the description of the wizard on the first page, then click Next.
3 Edit the service name in the Name box.
Editing the name is optional if this is the first service of this type you are
configuring on the switch.
4 Type the SSID name in the SSID box.
5 Select the SSID type:
Encrypted—Traffic on the SSID is encrypted.
Clear—Traffic on the SSID is unencrypted.
6 Click Next.
If you selected Encrypted in step 5, configure the encryption settings.
Go to step 7.
If you selected Clear in step 5, go to step 15.
7 Select the security modes you want the SSID to support. You can select
one or more of the following:
RSN (WPA2)
WPA
Static WEP
8 Click Next.
9 If you selected RSN or WPA in step 7, you can select whether to use
dynamically generated keys, or static keys based on a passphrase.
To use dynamically generated keys, leave the Pre-shared Key box
blank and go to step 10.
To use static keys, type a string from 8 to 63 characters long in the
Pre-shared Key box and click Generate.
10 Click Next.
11 Select the encryption algorithms to use:
AES (CCMP)—Usually used with RSN (WPA2)
TKIP—Usually used with WPA
WEP-104—Used with dynamic WEP
WEP-40—Used with dynamic WEP
Viewing and Configuring Wireless Services 257