Generating An Alarm Summary; Generating An Alarm History - 3Com WX4400 Reference Manual

434 C 16: G
HAPTER ENERATING
Generating an
Alarm Summary
Generating an
Alarm History
R
EPORTS
The origin reference point used in work orders to indicate MAP
placement is the upper left corner of the coverage area. (Typically, this
origin point will not match the origin point used on the floor plan itself.)
The alarm summary report provides a summary of alarms.
1 Select the Reports tool bar option.
2 In the Reports list, select Alarm Summary.
3 Select the scope type of the report from the Report Scope Type
drop-down list:
Network Plan
Mobility Domain
Site
Building
Floor
4 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
5 To select or change the output directory for the report, click Choose,
navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The alarm history report provides a history of alarms.
1 Select the Reports tool bar option.
2 In the Reports list, select Alarm History.
3 Select the scope type of the report from the Report Scope Type
drop-down list:
Network Plan
Mobility Domain