Managing Certificates; Reviewing Certificate Details; Deleting Certificates - 3Com WX4400 Reference Manual

Managing
Certificates
Reviewing Certificate
Details

Deleting Certificates

2 Do one of the following:
Click Accept to allow the connection to the WX switch.
If you did not select either of the options in step 1, when you click
Accept, a secure connection with these certificate credentials is
allowed for this session until you close the network plan.
Click Reject to reject the connection to the WX switch.
After installing certificates, you can review or delete a certificate in the
3WXM certificate store.
After installing a certificate in 3WXM, you can see information such as
the time frame for which the certificate is valid and who issued the
certificate.
To review certificate details
1 Select Tools > Certificates from the menu bar in the main 3WXM
window.
2 Select a certificate from the list, and click Details. (You can also
double-click the certificate to see its details.)
The Certificate Details dialog box appears, listing the certificate
information.
3 Click Close.
4 In the Certificate Management dialog box, click Close.
To delete certificates, follow these steps.
1 Select Tools > Certificates from the menu bar in the main 3WXM
window.
2 Select a certificate from the list.
3 Click Delete.
4 When prompted, click Yes to confirm the certificate deletion, or click No
to cancel the deletion.
If you clicked Yes, the certificate is deleted.
5 In the Certificate Management dialog box, click Close.

Managing Certificates

385