Creating A Policy - 3Com WX4400 Reference Manual

388 C 13: C
HAPTER ONFIGURING AND

Creating a Policy

A P
PPLYING OLICIES
To create a policy:
1 Access the Create Policy wizard.
a Select the Policies tool bar option.
b In the Task List panel, select Policy.
2 In the Policy Name box, type a name for the policy. This name will appear
in the Organizer panel when the Policies tool bar option is selected.
3 To configure a policy for a specific switch model, select the model from
the WX Model Filter drop-down list.
4 To configure the policy to support an older version of 3WXM than is
currently running, select the version from the WX Version Filter
drop-down list.
5 Click Next.
6 Select the feature areas you want to set in the policy.
When you apply the policy to a switch, all parameter settings from all of
the selected feature areas are applied to the switch. This includes any
settings left at their default settings in the policy.
7 Click Next.
8 In Available Devices list, select the switches to which you want to apply the
policy, then click Add to move the switches to the Current Devices list.
Moving a switch to the Current Devices list does not automatically apply
the policy to the switch. To apply policy settings, see "Applying Policy
Changes to Switches" on page 389.
9 Click Finish and go to "Configuring Feature Settings in a Policy".