Viewing And Changing The Auto-Dap Profile; Viewing Auto-Dap Profile Settings; Changing Auto-Dap Profile Settings - 3Com WX4400 Reference Manual

Viewing and
Changing the
Auto-DAP Profile
Viewing Auto-DAP
Profile Settings
Changing Auto-DAP
Profile Settings
You can use an Auto-DAP profile to deploy unconfigured Distributed
MAPs. A Distributed MAP that does not have a configuration on a WX
switch can receive its configuration from the Auto-DAP profile instead.
The Auto-DAP profile assigns a Distributed MAP number and name to the
MAP, from among the unused valid MAP numbers available on the
switch. The Auto-DAP profile also configures the MAP with the MAP and
radio parameter settings in the profile. The MAP and radio parameter
settings in the Auto-DAP profile are configurable.
The Auto-DAP profile does not control SSIDs, encryption parameters, or
any other parameters managed by service profiles. You still need to
configure a service profile separately for each SSID.
A WX switch can have one Auto-DAP profile.
To view Auto-DAP profile settings:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Auto-DAP.
The Auto-DAP profile settings appear in the Content panel.
To change settings for Auto-DAP profile of a switch:
1 To enable the Auto-DAP profile, select Enabled.
2 To select the radio type, click the MAP Radio Type box and select the
radio type from the list:
11a—802.11a
11b—802.11b only
11g—802.11b/g
3 In the Enable Blink list, select Yes to enable LED blink mode or No to
disable it.

Viewing and Changing the Auto-DAP Profile

279