Displaying The Geographical Location Of A Rogue - 3Com WX4400 Reference Manual

478 C 18: D
HAPTER ETECTING AND
Displaying the
Geographical
Location of a Rogue
C R
OMBATTING OGUE
Displaying Rogue Client Information
To display details about the clients of rogue devices, select the rogue in
the alarm list, then click View Clients in the Task List panel.
Table 38 lists the information displayed on about clients of rogue devices.
Table 38 Clients Columns
Column
Client
Vendor
Channel
SSID
Displaying Rogue History
To display the alarms that were generated during the during the
most-recent 30-day period, click History Task List panel.
If building and floor information for the site is modeled in the network
plan, you can display the likely physical location of a rogue. 3WXM
displays the floor plan for the floor where the rogue is believed to be
located, and displays the areas where the rogue is probably located.
This option displays the likely location of the rogue when the data was
collected by the monitoring service from the seed switch and a Mobility
Domain. If the rogue has moved since then, the location information will
not be current.
To display the location of a rogue within a site
1 Select the rogue in the alarm list.
2 In the Task Panel, under Related Tasks, click Locate.
The Device Location screen appears, indicating the approximate location
of the rogue.
D
EVICES
Description
MAC address of the client.
Manufacturer of the client.
Channel the client is on.
SSID the client is associated with.