Adding Clients Belonging To A Rogue To The Black List; Configuring Rf Detection Options From The Organizer Panel - 3Com WX4400 Reference Manual

484 C 18: D
HAPTER ETECTING AND
Adding Clients
Belonging to a
Rogue to the Black
List
Configuring RF
Detection Options
from the Organizer
Panel
C R
OMBATTING OGUE
The client black list is a list of MAC addresses belonging to wireless clients
who are not allowed on the network. MSS prevents clients on the list
from accessing the network through a WX switch.
1 In the Alarm screen, select the client you want to place on the black list.
2 Click Add to Black List on the toolbar. The Select Devices dialog is
displayed.
3 Select the clients you want to add to the black list. The Select Devices
dialog is displayed.
4 If the switch(es) on which you are configuring the black list are in a
Mobility Domain, select the Mobility Domain. Otherwise, select None.
5 Click next to select all of the switches that are listed, or click next to
individual switches to select them.
6 Click OK. The selected clients are added to the black list. MSS drops all
packets from these clients.
Although the Rogue Detection toolbar options provide the simplest way
to configure rogue detection features, you also can configure them on an
individual switch basis. To configure rogue detection settings for a switch,
see "Viewing and Changing RF Detection Settings" on page
D
EVICES
293.