Board Installation - Altigen AltiWare OE/ACC Version 5.0A Administration Manual

Configuring the Triton VoIP Board
the Number of Dialed Digits to "None." Refer to "Defining the IP
Dialing Table" on page 5-29.
5. Set the VoIP codecs so that servers use the same codec. See "Setting
VoIP Codecs" on page 10-12.
6. Repeat steps 1 through 5 for all local and remote AltiWare systems that
are to be networked via tie-trunk line connection.
This completes the AltiWare-to-AltiWare network connection. Your
organization is now ready to make and receive IP trunk calls through public
or private IP networks.
Note:
Extension users should refer to the AltiView and AltiServ User
Guide for instructions on how to dial a remote AltiServ. Also, be
sure to distribute the Remote Locations Dialing Chart with your
organization's unique dialing plan. This chart is available in the
AltiView and AltiServ User Guide.

Board Installation

Double click the board's icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 14. Board Configuration window (VoIP Board)
The Board Configuration window for the Triton VoIP board displays the
same options as the Quantum board, which are discussed in "Configuring
the Quantum Board" on page 6-2.
6-32 AltiWare OE System Installation & Administration Manual