Altigen AltiWare OE/ACC Version 5.0A Administration Manual page 360

Apply To Button
The Apply To button works with the following parameters: General,
H.323, TFTP Server field (Reset IP Phone and Boot Download options
cannot be applied to multiple extensions), Display Workgroup Status and
Debug.
Copy From Button
The Copy From button allows you to copy Function Key settings from
one IP phone setting to another. No other settings are carried over.
IP Extension Log In/Log Out
The feature codes #26 (Extension Log Out) and #27 (Extension Log In) are
available on the IP phone. When the IP phone is logged in using #27 +
ENTER, the LCD displays the extension number. The IP phone must be
onhook for #26 and #27 to work.
Dialing an IP Number Directly from the IP Phone
To dial an IP number directly from the IP phone, enter the IP address using
the * key to enter periods, and followed by the # key.
Notes:
• This works only when the IP phone is operating in Basic mode.
• If the IP phone is configured for a public IP address, you can call other
public IP address devices.
• If the IP phone is configured for a private IP address, you can call other
private IP address devices that you can "see" or that are on your subnet.
12-6 AltiWare OE System Installation & Administration Manual