Altigen AltiWare OE/ACC Version 5.0A Administration Manual page 205

traffic to reach AltiWare. For firewall considerations, refer to page
6-27.
For the Remote IP Phone Using NAT:
• IP Phone 3
When configuring remote IP phone 3, you should set up the GKIP
or GWIP based on the gatekeeper/gateway mode. In this case,
AltiGatekeeper's/AltiWare's IP address are the same, which is
169.254.101.2. Note that only one (1) IP phone can be behind the
NAT and connect to the AltiWare through the NAT.
• Router 2
Router 2 is a router supporting NAT with the remote IP phone
connected. You need to set up the H323FWIP for this NAT to the
private IP address of IP Phone 3 192.168.2.100. For information on
how to set up the H.323 traffic forwarding for NAT, please refer to
page 6-28.
For the Remote IP Phone Directly on Internet:
• IP Phone 4
When configuring remote IP Phone 4, you should set up the GKIP
or GWIP based on the gatekeeper/gateway mode. In this case,
AltiGatekeeper's/AltiWare's IP address are the same, which is
169.254.101.2.
For an H.323 IP Call from Another AltiWare on Internet
Another AltiWare can make an H.323 IP call to this AltiWare by calling the
AltiWare's/AltiGatekeeper's public IP address, which is 169.254.101.2.
AltiWare OE System Installation & Administration Manual
Board Configuration
6-23