Table of Contents
Advertisement
Setting up Groups
To open the Extension view of the Group window:
1.
Select the Virtual or Physical extension number in the list of
extensions in the General window.
2.
Click the Group tab. The Extension view of the group window opens,
with the extension number appearing in the window title bar.
Figure 11. Extension view of Group window, Extension Configuration
Adding or Removing Group Assignments
To assign groups to the selected physical or virtual extension:
1.
In the Extension view of the Group window, click the Group
number(s) in the Not Member list.
2.
Click the Add button to move them to the Member list.
Note: If the group extension is configured to Ring All Available
Members, the maximum number of members is 20. See
"Setting Huntgroup Handling" on page 10-50 or "Setting
Workgroup Handling" on page 10-51 for details.
10-28 AltiWare OE System Installation & Administration Manual
Advertisement
Table of Contents
Troubleshooting
