Altigen AltiWare OE/ACC Version 5.0A Administration Manual page 180

Feature Profiles
Call Management:
#26 – Station Logout
#27 – Station Login
#32 – Enter Account Code
#33 – Do Not Disturb
#36 – Call Forwarding
#37 – Remote Call Forwarding
Other Features:
#38 – Outside Call Blocking
#39 – Operator Offline
#44 – Overhead Paging
#45 – Overhead Paging by Trunk
#46 – Group Paging
#53 – Outgoing Workgroup
#54 – Login Workgroup
#56 – Logout Workgroup
#59 – Workgroup Call Monitor
#73 – Silent System Call Park
#90 – Ready to Receive Workgroup Call
#91 – Not Ready to Receive Workgroup Call
Session Types:
Specify whether or not to allow the following types of sessions for
the extension:
AltiView / AltiAgent / AltiSupervisor / AltiConsole / AltiGen SDK
/ IP Talk
Note: If the extension is an IP extension, #26 / #27 is still available, even
if it is disabled in the extension's feature profile.
To add a Feature Profile
By default, a System feature profile is assigned as 0. To add a new Feature
Profile, click the Add button to open the Add Feature Profile dialog box
and type in a Name for the feature profile.
Figure 26. Add Feature Profile
5-40 AltiWare OE System Installation & Administration Manual