Board Configuration - Altigen AltiWare OE/ACC Version 5.0A Administration Manual

Table of Contents

Advertisement

• CRC4
Line Coding:
• Alternate Mark Inversion (AMI)
• HDB3 (recommended)
Physical Termination: RJ-48X or RJ-48C
Wire: 4 wires
E1 Channel Assignment
Data Channels Assignment: 1st channel (channel ID 0)
Channels Assignment: 17th channel (channel ID 16)
Hunting: Most Idle, Least Idle, Ascend, Descend
DNIS Digits: can be 3 to 10 digits
CSU/DSU Requirements
The CSU (channel service unit) is a device used to connect a digital trunk
line coming in from the phone company to the PBX. A CSU can terminate
signals, repeat signals, and respond to loopback commands sent from the
central office.

Board Configuration

Double click the board's icon in the Boards window (see Figure 1) to open
the Board Configuration window.
AltiWare OE System Installation & Administration Manual
Board Configuration
6-39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altiware oe/acc 5.0a

Table of Contents