Table of Contents
Advertisement
•
The Alti-Mobile Extension's "Primary Caller ID" field under Caller
Identification may need to include the area code. This field requires a
perfect match to accept a call from the mobile PSTN phone. Some
local COs will send the area code with the Caller ID even though the
call is in the home area code.
•
No caller name delivery to the Alti-Mobile Extension is supported.
•
No Message Waiting Indicator delivery is supported. (Use Message
Notification as a workaround).
•
If the Alti-Mobile Extension is using dynamic link between the virtual
and physical mobile extension channels, the caller ID is required for
verification purpose when the Alti-Mobile Extension calls in the
system to get system outbound dialing.
•
Since the DTMF key * is used for simulating the FLASH-HOOK,
there is no way to send * to system. So the central transfer, IVR, VM
(backward the VM menu) and boomerang features are limited.
•
For RNA for Alti-Mobile Extension, the ring count may not be
accurate.
•
On Triton Analog boards with answer supervision, strange behavior
may occur.
•
When placing calls to a AltiMobile Extensions that are cellular phones,
if the cellular phone is out of signal range, the caller may hear long
periods of silence.
15-10 AltiWare OE System Installation & Administration Manual
Advertisement
Table of Contents
Troubleshooting
