Software License Activation And Registration; Licensing - Altigen AltiWare OE/ACC Version 5.0A Administration Manual

Software License Activation and Registration

Software License Activation and
Registration

Licensing

The licensing has two components — a System Key which is a physical
device shipped with every copy of OE 5.0A. This hardware key is equipped
with a DB-25 connector that is designed to be connected to the parallel
printer port on the AltiServ system running OE 5.0A or later releases of
AltiWare. Optionally, a USB port version of the system key is available for
use on systems ONLY equipped with a USB port. The USB system key is
a special order item.
The second component is the feature license key.
The following table lists all licenses used in Release OE 5.0A. Without this
license, the following licenses are disabled.
Table 4. Release OE 5.0A License Summary
License
•
OE 5.0A
•
AltiView
•
AltiConsole
•
Station User
•
IP Talk
•
Client Applica-
tion SDK Session
•
Trunk Control
APC SDK Ses-
sion
The following table lists all licenses used in AltiServ Contact Center
5.0A. The following licenses require both OE 5.0A and ACC 5.0A base
licenses. Without these licenses, the following licenses will be disabled.
AltiWare OE System Installation & Administration Manual
Description/Notes
License required for fresh installation or upgrade to OE 5.0A
This license enables a per concurrent connection of AltiView client.
This license enables a per concurrent connection of AltiConsole
client.
This license counts the total number of physical and IP extensions
enabled in the system.
This license enables an IP Talk session
This license enables TCP/IP connection to 3rd party client
application.
This license enables concurrent trunk based SDK application ports
entering APC (Application Programming Control).
3-5