Altigen AltiWare OE/ACC Version 5.0A Administration Manual page 181

Note:
When adding a feature profile, the system will automatically
assign the lowest available number. For example, if 0, 1, 2 and 4
are already assigned, the system will assign "3" to the next feature
profile and not "5".
Select or de-select the checkboxes for the desired AltiServ feature codes
that will be associated with this feature profile, then click Apply.
After the System Administrator creates a Feature Profile, the Feature
Profile can be assigned to a specific extension from the General page of
Extension Configuration. (See "Feature Profile" on page 10-19 for more
information on assigning a feature profile to an extension.)
Figure 27. Feature Profile option, Extension Configuration
Important: When assigning a feature profile (for example: 2 - Sales
Group) to an extension in Agent Extension Configuration,
and this assigned feature profile is deleted in the Feature
Profiles page in System Configuration, if a new feature
profile (for example: 2 - Marketing Group) is assigned that
shares the same number, the extension will automatically be
assigned to the new feature profile. So, it is important to note
which extensions are assigned to certain feature profiles,
especially when adding new profiles or deleting old ones.
AltiWare OE System Installation & Administration Manual
System Configuration
5-41