*1: Although there is no factory default setting, it is set to [1: Movable] when you turn on the power. Therefore, the setting does not change even when you

initialize the operator panel.

*2: Although there is no factory default setting, it is set to [4: Lower] when you turn on the power. Therefore, the setting does not change even when you

initialize the operator panel.

*3: Although there is no factory default setting, the settings are configured as follows when you turn on the power: [2: Multiple sheets] for [No. of sheets

scanned], [1: Front Side] for [Print], [1: (L)ABCDEFGHIJKLMNOPQRSTUVWXYZ[|]^_'00000000] for [Print Pattern], and [1: Yes] for [Test Print].

Therefore, the settings do not change even when you initialize the operator panel.

*4: [Print: 1: Front Side / 2: Back Side] does not appear unless both Front-Side and Back-Side Imprinters are installed.

*5: Although there is no factory default setting, it is set to [2: No] when you turn on the power. Therefore, the setting does not change when you initialize the

operator panel.

Description

Setting/Value

- : No settings/values

Message for replacing consumables /

cleaning / replacing maintenance parts /

regular maintenance

TOP

Contents

Factory Default

Index

Introduction