Scanned Images Turn Out Elongated - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 8 Troubleshooting

Scanned images turn out elongated.

Are the rollers dirty?
No
Does the condition of the documents fulfill the
requirements described in "Precautions" in
(page 40)?
Yes
Are any of the consumables (*1) worn out?
No
Have you adjusted [Offset/Vertical Magnification
Adjustment]?
Yes
*1: "Consumables" refers to the pick roller, separator roller and brake roller.
Clean the rollers.
For more information on cleaning, refer to
Yes
Sheet)" (page 121)
Use a document that satisfies the required conditions.
"Paper Quality" For more details, refer to
No
Check the consumable counters. Replace the consumables if necessary.
For information on how to replace consumables, refer to
Yes
Consumables" (page
In [Hardware Setting] of the Software Operation Panel, adjust the scan scale in the
feeding direction.
No
For more details, refer to
Vertical Magnification Adjustment]" (page
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 166)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
"6.2 Cleaning the ADF (with Cleaning
or "6.3 Cleaning the ADF (with cloth)" (page
"2.2 Documents for Scanning" (page
130).
"Adjusting the Starting Position for Scanning [Offset/
186).
Contents
Introduction
123).
Scanner
Overview
How to Load
40).
Documents
Configuring
the Scan
"Chapter 7 Replacing
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
"8.4
Daily Care
first, then contact
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
TOP
Index
163