Documents - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 6 Daily Care
Brake Roller (1 unit)
Gently wipe the rollers so that the roller surface does not get damaged.
Wipe along the grooves of the roller surface. Remove the roller for
easier cleaning. For information on how to remove the brake roller, refer
to "7.4 Replacing the Brake Roller" (page
Feed Roller
Gently wipe the rollers so that the roller surface does not get damaged.
Clean the whole surface as you rotate the roller manually. Make sure to
clean thoroughly because the feeding performance is affected
especially when there is black foreign matter on the roller.
Inside the top cover (rollers: 2 locations × 2 units)
Feed Roller
137).
Paper path lower-side (rollers: 5 locations × 2 units)
Feed Roller
Assist Roller (rollers: 1 location × 2 units)
Gently wipe the rollers so that the roller surface does not get damaged.
Clean the whole surface as you rotate the roller manually. Make sure to
clean thoroughly because the feeding performance is affected
especially when there is black foreign matter on the roller.
Assist roller is located on the paper path lower-side.
Assist Roller
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load

Documents

Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
124