Paper Jams/Pick Errors Occur Frequently - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 8 Troubleshooting

Paper jams/pick errors occur frequently.

Does the condition of the documents fulfill the
requirements described in "Precautions" in
(page 40)?
Yes
Has any foreign matter entered inside the ADF?
No
Are the consumables (*1) installed correctly?
Yes
Are any of the consumables (*1) dirty?
No
Are any of the consumables (*1) worn out?
No
Did you adjust the paper separation force on the operator
panel?
Yes
*1: "Consumables" refers to the pick roller, separator roller and brake roller.
Use a document that satisfies the required conditions.
"Paper Quality" For more details, refer to
No
Clean or remove any foreign matter from the ADF.
For information on cleaning, refer to
Yes
(page 121)
Install the consumables (*1) correctly.
For information on how to install the consumables, refer to
No
Consumables" (page
Clean the consumables (*1).
For information on cleaning, refer to
Yes
(page 121)
Check the consumable counters. Replace the consumables if necessary.
For information on how to replace the consumables, refer to
Yes
Consumables" (page
Lower the paper separation force if it is set high.
For information on how to adjust the paper separation force, refer to
No
the Paper Separation Force" (page
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 166)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
"2.2 Documents for Scanning" (page
"6.2 Cleaning the ADF (with Cleaning Sheet)"
or "6.3 Cleaning the ADF (with cloth)" (page
130).
"6.2 Cleaning the ADF (with Cleaning Sheet)"
or "6.3 Cleaning the ADF (with cloth)" (page
130).
26).
Contents
Introduction
40).
Scanner
Overview
How to Load
123).
Documents
Configuring
the Scan
"Chapter 7 Replacing
Settings
How to Use
the Operator
Panel
123).
Various Ways
to Scan
"Chapter 7 Replacing
Daily Care
Replacing
Consumables
"1.9 Adjusting
Troubleshooting
"8.4
first, then contact
Operational
Settings
Appendix
Glossary
TOP
Index
162