Documents - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 6 Daily Care
4
Close the hopper/ADF/top cover.
For information on how to close the hopper, refer to
Closing the Hopper" (page 19).
For information on how to close the ADF, refer to
Closing the ADF" (page 20).
For information on how to close the top cover, refer to
Closing the Top Cover" (page 22).
Confirm that the ADF is closed properly. You may not be
able to perform scanning if the ADF is not closed properly.
5
Reset the cleaning counter.
Reset the counter by one of the following methods.
Select [23: Show/Clear Counters] from the [Main Menu] of the
operator panel, then reset the counter.
For more details, refer to "4.2 Main Menu" (page
Start up the Software Operation Panel and reset the counter. For
more details, refer to "Resetting the counters" (page
"1.4 Opening/
"1.5 Opening/
"1.6 Opening/
65).
183).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load

Documents

Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
129