Konica Minolta SL1000 Microfiche User Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Scanner
  5. SL1000 Microfiche
  6. User manual

Konica Minolta SL1000 Microfiche User Manual

Digital film scanner
Hide thumbs
Table of Contents

Advertisement

Quick Links

SL1000 Digital Film Scanner
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta SL1000 Microfiche

Summary of Contents for Konica Minolta SL1000 Microfiche

  • Page 1 SL1000 Digital Film Scanner User’s Guide...
  • Page 2 International ENERGY STAR® Compliance Statement The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipment.

  • Page 3: Safety Information

    SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Make sure you observe all of the precautions listed in this manual.
  • Page 4 SAFETY INFORMATION WARNING ● Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. ● Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness.
  • Page 5 SAFETY INFORMATION WARNING ● Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the Power Switch, unplug the power cord from the power outlet, and then call your authorized service representative.
  • Page 6 SAFETY INFORMATION CAUTION ● Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs. ● The socket-outlet shall be installed near the machine and shall be easily accessible as the power plug may be difficult to pull out when an emergency occurs.
  • Page 7 INFORMATIONS DE SÉCURITÉ Cette section contient des instructions détaillées sur l'utilisation et l'entretien de cette machine. Pour obtenir un rendement optimal de cette machine, il est imperative que toutes les personnes l'utilisant lisent attentivement et observent scrupuleusement les consignes de ce manuel. Veuillez conserver ce manuel en lieu sûr, à...
  • Page 8 INFORMATIONS DE SÉCURITÉ WARNING Ne modifiez pas ce produit, car cela risquerait de causer un incendie, une électrocution ou une panne de l'appareil. Si ce produit comporte un laser, sachez que l'exposition au rayon laser pose un risque pour les yeux. N'essayez jamais de démonter les couvercles et panneaux montés sur le produit.
  • Page 9 INFORMATIONS DE SÉCURITÉ WARNING Ne posez jamais de vase ou tout autre récipient contenant de l’eau, ainsi que de petits objets métalliques tels que des trombones sur l’appareil. Si le récipient venait à être renversé ou des objets métalliques venaient à tomber dans l’appareil, cela risquerait de provoquer un incendie, une électrocution ou une panne de l’appareil.
  • Page 10 INFORMATIONS DE SÉCURITÉ CAUTION Ne posez aucun objet à proximité de la prise de courant alimentant le cordon car cela risquerait de gêner l’accès au cordon et son retrait en cas d’urgence. Veillez à ce que la prise de courant alimentant l’appareil se trouve à proximité de ce dernier et soit facile d’accès afin de permettre un retrait rapide du cordon d’alimentation en cas d’urgence.
  • Page 11 Welcome Please follow the instructions given in this manual when operating the system and do not touch any part of the system the manual does not cover. NEVER attempt to disassemble or rebuild the system. The contents of this manual are subject to change without notice. No part of this manual may be quoted, reproduced or translated into any other language.
  • Page 12 Introduction Thank you for choosing our Digital Film Scanner “SL1000” (herein after referred to as “the Scanner”). This User’s Guide includes precautions for installation/operation of the Scanner, a system outline, an explanation of the Driver software, operation procedures for the Scanner, troubleshooting tips, maintenance, and product specifications.
  • Page 13 Interference-Causing Equipment Standard (ICES-003 ISSUE 4) For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. UL/UL Marking This equipment has been tested and found to comply with UL60950-1. CE Marking (Declaration of Conformity) (For European Users) This product complies with the following EU directives: 2006/95/EC and 2004/108/EC directives.
  • Page 14 Organization This manual consists of the following seven chapters. Chapters 1 and 2 contain basic information about the Scanner, including safety precautions for installation/operation, system configuration, and features. Be sure to read these chapters before using the Scanner. Chapter 1 Precautions for Installation and Operation Provides safety precautions required to ensure correct installation and operation of the Scanner.

  • Page 15: Table Of Contents

    Contents Chapter 1 Precautions for Installation & Operation....1-1 Precautions for Installation............1-2 Installation Environment.............. 1-2 Power Source ................1-2 Grounding ................... 1-2 Space Requirements..............1-3 Precautions for Installation and Operation ........1-5 Operating Environment ............... 1-5 Precautions when operating the Scanner ........1-5 Precautions when operating the Personal Computer ....
  • Page 16 Delete File ................. 3-58 Roll Film Carrier ................3-59 Roll Film Carrier ................3-59 Multiple SCAN ................3-61 Multiple SERACH ..............3-63 Chapter 4 Operation..............4-1 Precautions for Operation .............4-2 Main Unit ..................4-2 Roll Film Carrier (Option) ............4-2 Turning the Scanner ON/OFF ............4-3 Turning ON the Power Switch .............

  • Page 17: Chapter 1 Precautions For Installation & Operation

    Chapter 1 Precautions for Installation & Operation...

  • Page 18: Precautions For Installation

    SL1000 User’s Guide 1 Precautions for Installation Installation Environment Install the Scanner in a location, which meets the following requirements to ensure safe operation and utmost performance.  A well-ventilated place  An area which is free from ammonia or other organic gases. ...

  • Page 19: Space Requirements

    Chapter 1 Precautions for Installation & Operation Space Requirements  Secure the recommended space shown in the figure below to ensure easy operation and maintenance of the Scanner. [Standard: Fiche Carrier Model]...
  • Page 20 SL1000 User’s Guide [Motorized Roll Film Carrier /Manual Roll Film Carrier Model]...

  • Page 21: Precautions For Installation And Operation

    Chapter 1 Precautions for Installation & Operation 2 Precautions for Installation and Operation Operating Environment The following environment is required for consistent performance of the Scanner: Temperature: 50 to 95°F (10 to 35°C) with temperature variations not exceeding 18°F (10°C) per hour.

  • Page 22: Moving The Scanner

    SL1000 User’s Guide Moving the Scanner When moving the Scanner, observe the following:  When carrying the Scanner, hold as shown in the below figure. Be careful not to hurt your back.  When moving the Scanner, be sure to disconnect the Power Cord and the USB Cable. ...

  • Page 23: Chapter 2 Overview

    Chapter 2 Overview...

  • Page 24: Features

    SL1000 User’s Guide 1 Features This Scanner is digital screen-less Scanner that has developed for the microfilm editing to the digital image for a high-speed scanning. There are the following features. ◆ The machine has a small footprint and light weight. And, the installation location is not limited. ◆...

  • Page 25: Part Identification And Functions

    Chapter 2 Overview 2 Part Identification and Functions Main Unit 1. Indicator Lamp Scanner condition is shown. 2. Fiche Carrier: Film is set to desired position. 3. Fiche Glass: Film held in place. 4. Carrier Handle: To insert, remove or correctly position the fiche film. 5.

  • Page 26: Roll Film Carrier (Option)

    SL1000 User’s Guide Roll Film Carrier (Option) 1. Reel Shaft: Roll Film is inserted. 2. Take-Up Reel: Roll Film is wound. 3. Guide Roller: The Roll Film is guided.

  • Page 27: Chapter 3 Application "Sl-Touch For Sl1000

    Chapter 3 Application “SL-Touch for SL1000”...

  • Page 28: Sl-Touch For Sl1000 Setup

    SL1000 User’s Guide 1 SL-Touch for SL1000 Setup It is necessary to install 'SL-Touch for SL1000' in the Personal Computer beforehand to display the image and to take it with a Personal Computer connected with SL1000. This chapter describes the system requirements of the Personal Computer and the installation procedure of 'SL-Touch for SL1000'.

  • Page 29: Installation The Application Software And The Driver Software

    Chapter 3 SL-Touch for SL1000 Installation the Application Software and the Driver Software NOTE ! Must install "SL-Touch for SL1000" before connecting the Scanner. When the Scanner is connected before "SL-Touch for SL1000" is installed, "Found New Hardware Wizard" is displayed. In this case, please end the wizard clicking the cancel button.
  • Page 30 SL1000 User’s Guide When the installation screen appears, Click “Install SL-Touch for SL1000” to begin the installation. If the “User Account Control” screen appears, click the “Yes” button. NOTE ! This screen may not be displayed, depending on the settings of the computer.
  • Page 31 Chapter 3 SL-Touch for SL1000 When the installation screen of “Microsoft .NET Framework 4.0 Client" and “Microsoft SQL CE3.5 SP2" is displayed, click the “Install" button. NOTE ! When the above-mentioned item has already been installed the Personal Computer, this installation screen is not displayed. When the “Welcome to the InstallShield Wizard for SL-Touch for SL1000”...
  • Page 32 SL1000 User’s Guide When the License Agreement” screen appears, confirm the following messages and click the “Yes" button. Click the “Install” button. When the “Windows Security” screen appears, click “Install this driver software anyway”.
  • Page 33 Chapter 3 SL-Touch for SL1000 When the “InstallShield Wizard Complete” screen appears, click the “Finish” button and remove the CD-ROM from the Personal Computer. IMPORTANT ! Execute the installation of the device driver when the installation of SL-Touch for SL1000 application is completed. If the installation of the device driver is not completed, the application cannot be started.

  • Page 34: Update The Application Software And The Driver Software

    SL1000 User’s Guide Update the Application Software and the Driver Software The SL-Touch for SL1000 application is updated in the computer according to the following procedures. The following procedure shows the application and driver update for Windows 7. Administrative rights are needed for the application and the driver update. NOTE ! When updating the application and driver, the uninstallation of the application and driver of the previous version is unnecessary.
  • Page 35 Chapter 3 SL-Touch for SL1000 When the “Windows Security” screen appears, click “Install this driver software anyway”. When the “Update Complete” screen appears, click the “Finish” button, and remove the CD-ROM from the Personal Computer. IMPORTANT ! When the SL-Touch for SL1000 application is updated, the device driver is deleted once.
  • Page 36 SL1000 User’s Guide “Installing device driver software” appears. When “SL1000 Digital Film Scanner Device driver software installed successfully” is displayed, the driver was installed successfully. 3-10...

  • Page 37: Uninstalling The Application Software And The Driver Software

    Chapter 3 SL-Touch for SL1000 Uninstalling the Application Software and the Driver Software When “SL-Touch for SL1000” installed on the Personal Computer is no longer necessary, use the following procedure to remove it. The following procedure shows the application and driver uninstall for Windows 7. Administrative rights are needed for the application and the driver uninstall.
  • Page 38 SL1000 User’s Guide When the “Uninstall Complete” screen appears, click the “Finish” button. Restart the Personal Computer. 3-12...

  • Page 39: Application Start-Up And Shutdown

    Chapter 3 SL-Touch for SL1000 2 Application Start-Up and Shutdown Application Start-Up There are "SCAN Mode" and "VIEW Mode", and the mode changes into "SL-Touch for SL1000" by connecting the Scanner when start up. NOTE ! Connect the Scanner before you start an application, complete the Application and the Driver Installation.If you start an application before connecting the Scanner will display an error message.

  • Page 40: Application Shutdown

    SL1000 User’s Guide Application Shutdown It is possible to shutdown the application using one of the following methods.  Click the "×" button in the upper right corner of the title bar.  Hold down the application bar (located under the title bar) until “Shutdown Application” is displayed.

  • Page 41: Scan Mode Screen

    Chapter 3 SL-Touch for SL1000 3 SCAN Mode Screen The image is displayed on the application screen. This mode enables you to read the image and set various functions. Listed below is an explanation of the functions that can be set in SCAN Mode. 1.
  • Page 42 SL1000 User’s Guide 4. Help Button The Help file is displayed The Help file is also displayed when the "F1" key on the keyboard is pressed. 5. Roll Film Carrier The Motorized Roll Film Carrier (Option) is operated.  5.1 RollFilmCarrier 3-16...

  • Page 43: Toolbar

    Chapter 3 SL-Touch for SL1000 Toolbar to VIEW Mode It changes from the SCAN Mode to the VIEW Mode. Film Selection The Film Selection screen is displayed.  3.2 Film Selection Auto Focus It is automatically adjusted to the best focus. It may not function correctly due to the NOTE ! ...
  • Page 44 SL1000 User’s Guide Deskew CCW The image is counterclockwise and is aligned when the button is depressed. (max. 45 degrees) Deskew CW The image is clockwise and is aligned when the button is depressed. (max. 45 degrees) When the inclination is corrected, the arrow of NOTE ! ...
  • Page 45 Chapter 3 SL-Touch for SL1000 Magnifier + The displayed image is continuously magnified. The magnification amount is displayed in the scan window (upper right) while zooming. Magnifier - The image that has been magnified is reduced. When an image is magnified, the Cropping NOTE ! ...
  • Page 46 SL1000 User’s Guide Multiple SCAN The continuous scanning screen of the Roll Film is displayed. (The Motorized Roll Film Carrier of the option must be installed.)  5.1 Multiple SCAN Multiple SEARCH The continuous retrieval screen of the Roll Film is displayed. (The Motorized Roll Film Carrier of the option must be installed.) ...
  • Page 47 Chapter 3 SL-Touch for SL1000 Pan Window The window of a whole image (pan window) is displayed at the zoom. The image in the scan window also follows when the frame of the pan window is dragged and moved. Oppositely the frame of the pan window also follows when the image in the scan window is dragged and moved.

  • Page 48: Film Selection

    SL1000 User’s Guide Film Selection The type of the film is selected and the setting (display color and zoom magnification, etc.) that is appropriate for the film is achieved. 1. Custom Profile Allows you to select a registered custom profile. 2.
  • Page 49 Chapter 3 SL-Touch for SL1000 The proper zoom magnification is set to the Micro Fiche Film 60F or 98F. The proper zoom magnification is set to the Micro Fiche Film 270F or 420F. The proper zoom magnification is set to the Micro Opaque Card. Moreover, the exposure lamp illuminance also set a proper value to the Micro Opaque Card.
  • Page 50 SL1000 User’s Guide 7. Horizontal Flip Images are flipped to the right and left.. When the Roll Film is selected, the initial value of NOTE !  "Horizontal Flip" is “ON” 8. Rotate The image rotation is selected. You can select four rotation values (None, CW90°, CCW180° and CCW90°).

  • Page 51: Image Adjustment

    Chapter 3 SL-Touch for SL1000 Image Adjustment The display and the image quality when scanning are adjusted. The adjusted value is in real time reflected in the displayed image. “Standard Mode” and "Advance Mode" can respectively be set by switching the tab. Standard Mode A common item to the reading color is set.
  • Page 52 SL1000 User’s Guide 2. Adjustment Area The adjustable range of "Brightness" and "Contrast" is selected. Entire: Display of the histogram in read whole area and "Brightness" and "Contrast" are adjusted. Selected: Display of the histogram in read selected area and "Brightness" and "Contrast"...
  • Page 53 Chapter 3 SL-Touch for SL1000 4. Contrast The contrast of the image is adjusted. High The contrast of the image is increased. The contrast of the image is decreased. The proper image density can be obtained by adjusting NOTE ! ...
  • Page 54 SL1000 User’s Guide Advance Mode When the reading color is "Color" or "Monochrome binary", the following items can be set. Image Type: Color Image Type: B/W (Manual) 6. Hue The hue of the color image is adjusted. 7. Saturation The saturation of the color image is adjusted. 8.

  • Page 55: Lamp Illuminance

    Chapter 3 SL-Touch for SL1000 Lamp Illuminance The illuminance of the exposure lamp are set. 1. Lamp Illuminance Quantities of light of the exposure lamp are set. The exposure lamp is lightened. The image lightens for the positive film. The image darkens for the negative film. The exposure lamp is darkened.

  • Page 56: Output Setting

    SL1000 User’s Guide Output Setting The scan setting, the output setting and printer setting when "Scan to File" and "Scan to Print" are executed are set. 1. Batch – Title Register, set scan settings and delete batch settings of associated settings. When the selected item is registered, the registered name is input to "Batch Title"...
  • Page 57 Chapter 3 SL-Touch for SL1000 4. Save The input batch is preserved. When "Save" is clicked after "Batch title" is input, the batch is preserved. The following setting is preserved in the batch. Orientation, Size, Resolution, Image Type, Edit, Save in, File name, File number, Format, Compression, Printer Name, Fit to printable area of paper size, Rotate to orientation of paper It can not be preserved by changing the setting of...
  • Page 58 SL1000 User’s Guide 9. Image Type The mode of the output image (Color and Binary) is set. When Film "Color Film" is selected: Only the Color (24bit) can be selected. When film “Monochrome Film" is selected: It can be selected according to 4 selections (Gray Scale (8bit), B/W (Manual), B/W (Auto), B/W (Error Diffusion)).
  • Page 59 Chapter 3 SL-Touch for SL1000 11. Save In The SL-Touch folder is made under the My Pictures NOTE !  folder of the logon user of Windows. And, it can not be changed. When repository location has not been selected, “Save ...
  • Page 60 SL1000 User’s Guide 16. Printer Name The output printer is selected. 17. Fit to printable area When the image is output, the image is magnified or reduced based on of paper size the size of the paper. 18. Rotate to The image rotates and is printed according to the orientation of the orientation of paper paper.

  • Page 61: Preferences

    Chapter 3 SL-Touch for SL1000 Preferences The Application and the Scanner Settings are saved. It is necessary to input the password to display the screen in the environmental setting. The password of default is "0000". NOTE !  To initialize the password when the password was forgotten, contact the Servicing ...

  • Page 62: Custom Setting

    SL1000 User’s Guide 3. Ask Before Output It displays on the confirmation screen before the scan image is output when "The scan image is displayed" is “ON". For Scan to File Scan to Print 4. White Balance The correction of the white balance is set. There are two selections available (Manual and Auto).
  • Page 63 Chapter 3 SL-Touch for SL1000 14. Full Screen Change to the “Full Screen Mode" that doesn't display Windows Taskbar. NOTE ! ・It quits the application by "Alt" + "F4" for "Full Screen Mode" in the keyboard. 15. Use Large Icon The size of the icon button in the Toolbar is enlarged by one step.
  • Page 64 SL1000 User’s Guide Custom Setting "Film Setting" and “Toolbar Setting" for each custom profile can be saved as a custom registration. Film Setting 1. Custom profile Displays the custom profile name on the Film Selection screen. This is where the custom profile name is registered and can be deleted. When the custom profile is registered, the name of the custom profile is input to "Custom Profile"...
  • Page 65 Chapter 3 SL-Touch for SL1000 2. Delete Deletes registered custom profile. When deleted "Custom Profile" is selected, and "Delete" is clicked, the custom profile is deleted. NOTE ! The custom profile of "Default" cannot delete.  3. Save The custom profile which input is preserved. When "Save"...
  • Page 66 SL1000 User’s Guide Toolbar Setting 1. Non-display button The buttons not displayed on the toolbar is displayed in the list. 2. Toolbar The button displayed on the toolbar is displayed in the list. The list is displayed, queuing up in order from the left of the toolbar to the lower right.
  • Page 67 Chapter 3 SL-Touch for SL1000 7. Reset The button displayed in the toolbar is reset in the initial values. 8. Show Text of Icons The toolbar functions are displayed under the toolbar. 9. Show Output Setting "Output setting" button of the toolbar is displayed. Button 10.

  • Page 68: Password Change

    SL1000 User’s Guide Password Change The password to display "Preferences" screen can be changed. 1. Old password The password set now is input. The default password is “0000". NOTE !  2. New password The new password is input. The password can set only 4 digit numeral. 3-42...

  • Page 69: E-Mail Setting

    Chapter 3 SL-Touch for SL1000 E-Mail Setting E-Mail TX (SMTP) The transmission of the E-Mail is set. 1. SMTP server Sets the SMTP server address. 2. Port Number Sets the port number for E-mail is transmission. 3. SSL Sets the SSL (enable/disable) for E-mail is transmission. 4.

  • Page 70: Other Setting

    SL1000 User’s Guide E-Mail RX (POP) When "POP Before SMTP" is “ON", E-mail reception is enabled. 8. POP Before SMTP Sets POP Before SMTP (enable/disable). POP Before SMTP is not available when SMTP NOTE !  Authentication is enabled. 9. POP Server Sets the POP Server Address for E-mail reception.

  • Page 71: View Mode Screen

    Chapter 3 SL-Touch for SL1000 4 VIEW Mode Screen The image file preserved in the SCAN Mode is displayed and it can be edited. It is possible to display only with the batch file preserved with the connected NOTE ! ...
  • Page 72 SL1000 User’s Guide 2. View Window The image selected from the Thumbnail is displayed. When the VIEW Mode is started, the final scanned image is displayed in the SCAN Mode. NOTE ! When the touch panel is used, the image can be ...

  • Page 73: Toolbar

    Chapter 3 SL-Touch for SL1000 Toolbar to SCAN Mode It changes to the SCAN Mode. When the Scanner is not connected, it NOTE !  does not change to the SCAN Mode. Open The registered batch is opened. Save The edited image is overwritten and preserved. It cannot save by an another name or file NOTE ! ...
  • Page 74 SL1000 User’s Guide E-Mail The scanned file is transmitted via E-mail.  4.5 E-Mail Delete File The scanned file is deleted.  4.6 Delete File 3-48...

  • Page 75: Image Adjustment

    Chapter 3 SL-Touch for SL1000 Image Adjustment The image quality of the image being displayed now can be adjusted. 1. Histogram Distribution and the Mean Value of the Histogram of the Adjustment Area that has been selected are displayed. 2. Adjustment Area The adjustable range of "Brightness"...
  • Page 76 SL1000 User’s Guide 3. Brightness The brightness of the image is adjusted. 4. Contrast The contrast of the image is adjusted. NOTE ! The proper image density can be obtained by adjusting  "Brightness" and "Contrast" to distribute the Histogram in the whole area.

  • Page 77: Convert Multi-Page

    Chapter 3 SL-Touch for SL1000 Convert multi-page The selected image is converted from the image preserved in the batch into the multi page file. NOTE ! OCR conversion is only supported in English for "Searchable PDF" functions.  Other languages are not supported. It may take several minutes per file when OCR is executed.
  • Page 78 SL1000 User’s Guide 6. Add All All the object files of multi page output are added. 7. Add The selected file of the multi page output is added. It is added to the selection file that the file is selected, and "Add" is clicked.

  • Page 79: Ocr

    Chapter 3 SL-Touch for SL1000 The file is selected from PDF file where the batch was preserved, OCR is executed, and it converts it into PDF file for the OCR retrieval. OCR conversion is only supported in English for "Searchable PDF" functions. NOTE ! ...
  • Page 80 SL1000 User’s Guide 10. Export The OCR conversion begins. The "Cancel" button appears while executing the OCR conversion. When the Cancel button is clicked, the execution of the OCR conversion is canceled. NOTE ! When the OCR conversion is executed, it overwrites ...

  • Page 81: E-Mail

    Chapter 3 SL-Touch for SL1000 E-Mail The selected file is transmitted as an E-mail among files preserved by the batch. E-Mail 1. To: Inputs the E-mail Address. Image cannot be sent to multiple recipients. NOTE !  2. Address Book Opens the Address Book window.
  • Page 82 SL1000 User’s Guide 8. Message: Input the Message. 9. Total File Size The accumulated size of all files selected for transmission via E-mail is displayed. 10. Send Sends the E-mail. When a problem is encountered with an E-mail NOTE ! ...
  • Page 83 Chapter 3 SL-Touch for SL1000 Edit E-mail address is registered and edited. 1. Name Inputs the address name. 2. E-Mail Address Inputs the E-mail address. 3. OK Registers the edited name and address. 4. Cancel Cancels the selection and close the window. 3-57...

  • Page 84: Delete File

    SL1000 User’s Guide Delete File Operation that enables you to delete files. 1. Object File The file (file in the batch) selected for the deletion is displayed by the thumbnail. When you click on the thumbnail and the file background changes to orange, it indicates the file has been selected for deletion.

  • Page 85: Roll Film Carrier

    Chapter 3 SL-Touch for SL1000 5 Roll Film Carrier When the option "Motorized Roll Film Carrier" is utilized, it can be operated from "Roll Film Carrier" screen of the application. Roll Film Carrier Display Monitor Display Monitor Portrait Screen Landscape Screen Rewind The film is rewound.
  • Page 86 SL1000 User’s Guide Film Feeding The film feeding is continued in the forward direction (FWD Direction) while pressing ”FWD”, and stops when ”FWD” is released. slow fast Film Feeding The film rewinding is continued in the reverse (REV Direction) direction while pressing ”REV”, and stops when ”REV”...

  • Page 87: Multiple Scan

    Chapter 3 SL-Touch for SL1000 Multiple SCAN The frame (image) on the Roll Film is automatically detected, and the scan image is preserved in the file. 1. Film Operating When continuously scanning, the film operating direction is set. Direction 2. Edit When continuous scan is executed, “Masking", “Centering", and “Auto Fit"...
  • Page 88 SL1000 User’s Guide 5. Film Position The position of the film stop is adjusted. The stop position of "Multiple SEARCH", "Previous", NOTE !  and "Next" changes when the film position setting is altered. The film position can be adjusted while continuously ...

  • Page 89: Multiple Serach

    Chapter 3 SL-Touch for SL1000 Multiple SERACH The frame (image) on the Roll Film is automatically detected, and it displays on the screen at constant intervals. 1. Film Operating When continuously retrieving, the film operating direction is set. Direction 2. Interval After the frame (image) is retrieved, the stop time is set.
  • Page 90 SL1000 User’s Guide 6. SEARCH The continuous searching begins. The screen size is reduced and only "Counter" display and "Film Position" adjustment can be operated while continuously retrieving. In addition, the button display changes to "Cancel", and a continuous retrieving can be stopped. Continuous Retrieving 7.

  • Page 91: Chapter 4 Operation

    Chapter 4 Operation...

  • Page 92: Precautions For Operation

    SL1000 User’s Guide 1 Precautions for Operation Main Unit The following sections require special attention when operating the Scanner. Do not put anything on top of the Unit. Do not put items on the Fiche Glass. Do not put anything other than the film on the Fiche Glass.

  • Page 93: Turning The Scanner On/Off

    Chapter 4 Operation 2 Turning the Scanner ON/OFF Turning ON the Power Switch Check that the Scanner is securely connected to the Personal Computer with the USB Cable, and press the Power Switch of the Scanner to the ON (“I” Position). Power Switch NOTE ! When the USB Cable that connects this machine with the computer is not...

  • Page 94: Power Saving Features

    SL1000 User’s Guide Power Saving Features The Exposure Lamp goes OFF, and the Indicator Lamp flashes when the Scanner has not been used for a determined amount of time, and it enters the Sleep Mode. To return it to the Stand-by Condition, press any button of the application. This machine shuts down when leaving it without any operation after a continued amount of time when in the Sleep Mode Condition.

  • Page 95: Operating The Fiche Film

    Chapter 4 Operation 3 Operating the Fiche Film Film Selection "Film Selection" screen is opened by "SCAN Mode", and the type of the fiche film is selected. Film Insertion Take hold of the Carrier Handle and pull it forward fully, then the Fiche Glass will open. NOTE ! When the Fiche Carrier is pulled out to the maximum position, do not put heavy objects on the Carrier Table.
  • Page 96 SL1000 User’s Guide Position the Fiche Film on the Fiche Glass as shown on the figure below. Fiche Film Fiche Film Setting Place hands to both sides of the grips of the Fiche Carrier and fine-tune the image position. Left Grip Right Grip...

  • Page 97: Operating The Roll Film

    Chapter 4 Operation 4 Operating the Roll Film (When optional Roll Film Carrier is installed) Film Selection From Scan Mode please open the Film Selection Screen. Select the film and “Show Roll Film Carrier" is turned “ON”. You can select "35 mm Roll Film", "16 mm Roll Film"...

  • Page 98: Selecting The Film Width 16 Mm/35 Mm

    SL1000 User’s Guide Selecting the Film Width 16 mm/35 mm Pull out the front part of the Guide Roller, then reverse the directions of the roller and insert again. Change the position of other Guide Rollers in the same manner (4 pieces in total). NOTE ! All of the directions of the Guide Rollers must be in the same orientation.

  • Page 99: Loading The Roll Film

    Chapter 4 Operation Loading the Roll Film Motorized Roll Film Carrier Mount the Roll Film onto the Reel Shaft and unwind the Leading Edge of the Film. NOTE ! Be sure to set the film so that its winding direction is clockwise. The film will not be correctly rewound if the open reel Roll Film is mounted in the opposite direction.
  • Page 100 SL1000 User’s Guide Insert the Leading Edge of the Film between the Fiche Glasses. NOTE ! Route the film referring to the figure below. Insert the Leading Edge of the Film into the slit in the Take-Up Reel and rotate the Take-Up Reel two to three turns so that the Film Leader is wound around the Take-Up Reel.
  • Page 101 Chapter 4 Operation Manual Roll Film Carrier Remove the knob from the Reel Shaft. Knob Mount the Roll Film onto the Reel Shaft and unwind the Leading Edge of the Film. NOTE ! Be sure to set the film so that its winding direction is to be clockwise. The film will not be correctly rewound if the open reel Roll Film is mounted in the opposite direction.
  • Page 102 SL1000 User’s Guide Insert the knob in the Reel Shaft. Knob NOTE ! When the knob is inserted, D hole is inserted into the D shape position of the Reel Shaft. D hole D shape Grasp the Carrier Handle and pull it forward fully, the Fiche Glass will then open. Insert the Leading Edge of the Film between the Fiche Glasses Plate.

  • Page 103: Feeding The Film

    Chapter 4 Operation Feeding the Film Motorized Roll Film Carrier Press the following keys of “Roll Film Carrier" screen to operate the film. It is locked when a key is double-clicked, and it keeps feeding the film at the same speed. The film feeding stops when "Stop"...
  • Page 104 SL1000 User’s Guide Manual Roll Film Carrier When the forwarding or the rewinding knob is turned, the film is advanced or reversed. NOTE ! The knob can be operated when the handle of the Carrier Table is pulled out to maximum, which opens the Fiche Glass for film high-speed feeding.

  • Page 105: Rewinding The Film

    Chapter 4 Operation Rewinding the Film Motorized Roll Film Carrier Grasp the Carrier Handle and pull it gently out as far as it will go. This causes the Fiche Glass to swing up. Click "Rewinding", and the film is rewound. NOTE ! When Fiche Glass is not open completely, "Rewinding"...

  • Page 106: Operation Of The A-Type Cartridge Adaptor (Option)

    SL1000 User’s Guide Operation of the A-Type Cartridge Adaptor (Option) When the 16 mm Cartridge Film (type: ANSI) is used. Mount the 16mm Film Cartridge (type: ANSI) onto the Reel Shaft in the figure below and unwind the Leading Edge of the Film. NOTE ! ・Be sure to set the film cartridge so that its winding direction is to be clockwise.
  • Page 107 Chapter 4 Operation When the 16 mm/35 mm Roll Film (Open-Reel) is used. 16 mm/35 mm Roll Film (Open-Reel) can be used with the A-Type Cartridge Adaptor installed. Mount the 16 mm or 35 mm Film (Open-Reel) onto the Reel Shaft in the figure below and unwind the Leading Edge of the Film.

  • Page 108: Operation Of The M-Type Cartridge Adaptor (Option)

    SL1000 User’s Guide Operation of the M-Type Cartridge Adaptor (Option) When the M-Type Cartridge Film is used. Insert the Axis of the Attachment A into the hole of the Drive Shaft. Drive Shaft Axis Attachment A Insert the 2 Pins of the Attachment A in the Notches of the Drive Shaft. NOTE ! The position of Pins is adjusted so that Attachment Pins may surely connect it with notches.
  • Page 109 Chapter 4 Operation Unwind the Leading Edge of the film in M-Type Cartridge. Mount the M-Type Cartridge onto the Bracket so that the film position of Leading Edge is the lower direction and the hole side of the cartridge housing is the back direction. NOTE ! Be sure to insert the Hook of the Bracket into the square hole of the M-Type Cartridge.
  • Page 110 SL1000 User’s Guide Insert the Leading Edge of the film between the Fiche Glasses. NOTE ! Route the film referring to the figure below. Insert the Leading Edge of the Film into the slit in the Take-Up Reel and rotate the Take-Up Reel two to three turns so that the Film Leader is wound around the Take-Up Reel.
  • Page 111 Chapter 4 Operation When the 16 mm/35 mm Roll Film (Open-Reel) is used. Insert the Axis of the Attachment B into the hole of the Drive Shaft. Drive Shaft Axis Attachment B Insert 2 Pins of the Attachment B in the Notches of the Drive Shaft. NOTE ! The position of Pins is adjusted so that Attachment Pins may surely connect it with Notches.
  • Page 112 SL1000 User’s Guide Insert the 16 mm/35 mm Open Reel. 16 mm/35 mm Open Reel Insert the Leading Edge of the film between the Fiche Glasses NOTE ! Route the film referring to the figure below. Insert the Leading Edge of the Film into the slit in the Take-Up Reel and rotate the Take-Up Reel two to three turns so that the Film Leader is wound around the Take-Up Reel.

  • Page 113: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting...

  • Page 114: Problems With The Scanner

    SL1000 User’s Guide 1 Problems with the Scanner When any error occurs in the Scanner, an error message appears on the screen of the Personal Computer, the Indicator Lamp flashes and scanning stops. In this case, turn the Power Switch OFF and then back ON.

  • Page 115: Troubleshooting

    Chapter 5 Troubleshooting 2 Troubleshooting Flashing display of the Indicator Lamp Indicator Lamp Situation Action Indicator Lamp in front of the Main Body flashes The main body is in the Sleep Condition. approximately every second. It returns normally from the sleep if any key of the application is pressed.

  • Page 116: Errors Shown On The Personal Computer Screen

    SL1000 User’s Guide Information or Warning message Action ・ It is due to the non-detection of USB Memory or SL-Touch the shortage of the memory capacity in the Save In refers to location that is preservation place. unavailable. ・Please change the preservation setting to the large capacity place or insert the USB Memory etc.
  • Page 117 Chapter 5 Troubleshooting Error message Action • After confirming that the USB Cable is properly SL-Touch Error connected, turn ON the Power Switch of the H/W Error. Scanner again and restart the computer. Turn OFF the power switch of the Scanner, and turn it ON again.

  • Page 118: Trouble When Scanning An Image

    SL1000 User’s Guide 3 Trouble when scanning an image Trouble content Action The Scanner does not start. • Is it connected properly? Check if the USB Cable connected securely between the Scanner and the Personal Computer. When a problem cannot be solved even after the troubleshooting described above is attempted, contact your Authorized Dealer for service.
  • Page 119 Chapter 6 Maintenance...

  • Page 120: Chapter 6 Maintenance

    SL1000 User’s Guide 1 Maintenance The following daily checks and cleaning are required to ensure the best possible performance and utmost safety for the Scanner. Daily checks Any of the following conditions could damage the Scanner or other electrical equipment. Move the Scanner immediately and eliminate the possible cause of malfunction.

  • Page 121: Cleaning

    Chapter 6 Maintenance Cleaning Fiche Glass When dust and dirt adhere to the Fiche Glass, the original may not be read correctly. Please clean the Fiche Glass surface with a soft dry cloth. Fiche Glass Wipe the dirt of the fiche glass surface off with a soft cloth. Remove the dust with the air blower or the brush.
  • Page 122 SL1000 User’s Guide...

  • Page 123: Chapter 7 Product Specifications

    Chapter 7 Product Specifications...

  • Page 124: Major Specifications

    SL1000 User’s Guide 1 Major Specifications Type Digital Film Scanner Image Sensor Area Type Color CCD Sensor (14.22 Mega pixels) Light Source White LED for color Optical Zoom : 6.8 - 54x Lens Magnification Optical Zoom + Electrical Zoom : 6.8 - 105x Focus Adjustment Auto or Manual Optical Resolution...
  • Page 125 Chapter 7 Product Specifications 326 (W) x 425 (D) x 177 (H) mm Dimensions 12.83 (W) x 16.73 (D) x 6.97 (H) inches * Standard Fiche Carrier Model 13.5 kg or less Weight 29.76 lbs or less * Standard Fiche Carrier Model Power Source AC 100 - 240V 50/60 Hz Less than 30W...
  • Page 126 For Key Operator’s Use When you need to call for service, turn OFF the Power Switch first, and unplug the Power Cord from the Outlet. The Key Operator should be prepared to provide the following information to your Local Authorized Dealer. 1.
  • Page 128 2012 KYOKKO SEIKO CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. Manufactured For Konica Minolta by Kyokko Seiko 100 Williams Drive Ramsey, NJ 07446 2012.08 7170-7002-04...

This manual is also suitable for:

Sl1000

Table of Contents