Konica Minolta Fujitsu fi-6800 Operating Manual page 192

Chapter 9 Operational Settings
[Color 1], [Color 2], and [Color 3] tabs
Specify the color(s) to be dropped out. Up to three colors can be
selected at once.
- [Dropout] check box
Select this check box in the [Color 2] or [Color 3] tab when you
specify more than one color to be dropped out.
- [Red] / [Green] / [Blue]
Displays the information of the specified dropout color in
numerical values. These values can be typed in directly or
changed by clicking the [ ] / [ ] button.
- Sample color
Displays the specified color.
[Priority Black] check box
Select this check box when you do not want to drop out the text.
This option saves low-intensity colors such as black (generally
used for characters) from being dropped out.
[Sensitivity]
Specify the allowable range for the selected dropout color.
Range: 15 to 180 degrees
The larger the value, the wider the dropped out color range
becomes.
[File] button
Allows you to view an image file (*.bmp) in the [Original Image]
frame and select a dropout color.
[Apply] button
Applies the configured settings and closes the dialog box.
[Cancel] button
Cancels the configured settings and closes the dialog box.
When selecting [Custom], specify [None] for dropout
color in the scanner driver.
Note that priority is given to the scanner driver setting
when a dropout color is specified in the scanner
driver's setup dialog box.
This setting appears ONLY when Kofax VRS is used.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
192