Chapter 6 Daily Care; Documents - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 6 Daily Care

This chapter describes how to clean the scanner.
The glasses inside the ADF become very hot when the scanner
is being used. Before you start cleaning the inside, make sure to
turn off the power, unplug the power cable and wait at least 15
minutes for the ADF glass to cool down.
Do not use aerosol spray or spray that contains alcohol to clean
the scanner. Dust blown up by strong air from the spray may
enter inside the scanner which may cause the scanner to fail or
malfunction. Also note that sparks generated by static electricity
may cause a fire.
6.1 Cleaning Materials and Locations that Require Cleaning......................................................................... 119
6.2 Cleaning the ADF (with Cleaning Sheet)..................................................................................................121
6.3 Cleaning the ADF (with cloth)...................................................................................................................123
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load

Documents

Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary