Konica Minolta Fujitsu fi-6800 Operating Manual page 178

Chapter 9 Operational Settings
Item Description
Soft Pick Setting When you experience pick errors
from the separator roller slipping on
the paper, or paper jams from
scanning thin papers of small
widths, the symptom may be
improved by bringing down the pick
roller unit and keeping the unit at the
lower position (disabling the Soft
Pick Setting).
It can also be configured from the
operator panel.
AutoCrop Specify whether or not to optimize
Boundary (round up/down) the fractional part
of the scanned image data.
Auto color Specify the slice level for automatic
Detection color/monochrome detection.
Alarm setting Specify whether or not to sound an
alarm when an error such as
multifeed or paper jam occurs.
It can also be configured from the
operator panel.
Jam Detection Specify whether or not to judge the
outside of symptom as paper jam when a
scannable area document is skewed and passes
when transporting outside the supported scanning
paper area.
Setting/Value
Enable / Disable
Normal / Optimize
1 to 255 levels
Disable alarm / Low volume alarm /
High volume alarm
Enable / Disable
Factory Default SCSI or USB
Connector 1
: Configurable
-: Not configurable
Enable
Normal
5
Disable alarm
Enable
TOP
Contents
SCSI or USB
Index
Connector 2
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
-
Panel
Various Ways
to Scan
-
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
178