Vertical Streaks Appear On The Scanned Image - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 8 Troubleshooting

Vertical streaks appear on the scanned image.

Do the vertical streaks (lines) always appear in the same
location?
No
Does the vertical streak (line) disappear when you set a
lower resolution?
No
Is there any foreign matter (e.g. dust, paper dust) on the
document?
No
Clean the glasses and rollers inside the ADF.
For information on how to clean the glasses and each roller inside the ADF, refer
Yes
to "6.2 Cleaning the ADF (with Cleaning Sheet)" (page 121)
ADF (with cloth)" (page 123).
Specify a lower resolution and scan the document.
Yes
Remove any foreign matter off the document.
Such foreign matter on the document may be transferred onto the glasses inside
Yes
the ADF and cause the images to become dirty.
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 166)
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
TOP
Contents
Index
Introduction
or "6.3 Cleaning the
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
"8.4
first, then contact
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
158