Konica Minolta Fujitsu fi-6800 Operating Manual page 177

Chapter 9 Operational Settings
Item Description
Retain current Specify whether or not to keep the
paper thickness operator panel's paper separation
force setting upon turning the power
off.
Cleaning Cycle Specify the cycle for cleaning the
scanner.
Also specify whether or not to show
a message for cleaning from the
scanner driver.
Life Counter Alarm Specify the replacement cycles for
Setting the consumables.
Set the interval for If the bottom of the scanned image
feeding sheets is partially missing due to a large
skew when scanning in Automatic
Page Size Detection, specify a
longer interval to feed the
documents.
Specifying a longer interval leaves
more time between each document
to be scanned.
Pick Speed When multifeeds or paper jams
occur frequently, the symptom may
be improved by slowing down the
speed (pick speed) in which the
documents are fed.
It can also be configured from the
operator panel.
Setting/Value
Remember / Do not remember
1,000 to 255,000 sheets
(in increments of 1,000)
[Show cleaning instructions.] check box
Each consumable
10,000 to 2,550,000 sheets
(in increments of 10,000)
Short (default) - Long
(1 to 4 levels)
Normal / Slower
Factory Default SCSI or USB
Connector 1
: Configurable
-: Not configurable
Do not remember
10,000 sheets
Not selected
600,000 sheets
Short (default)
Normal
TOP
Contents
SCSI or USB
Index
Connector 2
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
177