Documents - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 6 Daily Care
8
Press the [Scan] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
9
Place the same Cleaning Sheet on the right-hand side
between the side guides with its adhesive side facing up.
Adhesive side
10
Press the [Scan] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
11
Remove the protective paper off a new Cleaning Sheet.
12
Place the Cleaning Sheet on the left-hand side between
the side guides with its adhesive side facing down.
13
Press the [Scan] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
14
Place the same Cleaning Sheet on the right-hand side
between the side guides with its adhesive side facing
down.
15
Press the [Scan] button.
The Cleaning Sheet is fed through and ejected onto the stacker.
16
Press the [Stop] button.
Cleaning is completed.
17
Reset the cleaning counter.
Reset the counter by one of the following methods.
Select [23: Show/Clear Counters] from the [Main Menu] on the
operator panel, then reset the counter.
For more details, refer to "4.2 Main Menu" (page
Start up the Software Operation Panel and reset the counter.
For more details, refer to "Resetting the counters" (page
TOP
Contents
Index
Introduction
65).
Scanner
Overview
183).
How to Load

Documents

Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
122